TOPS-10/TOPS-20 RSX-20F System Reference Manual

Chapter 1 Introduction
- 1.1 The PDP-11
  - 1.1.1 The UNIBUS
  - 1.1.2 The I/O Page
  - 1.1.3 Vector Interrupts
  - 1.1.4 Priorities
  - 1.1.5 Traps
  - 1.1.6 Data Transfers
  - 1.1.7 General Registers
  - 1.1.8 Stacks
  - 1.1.9 Instruction Set
- 1.2 RSX-11M Operating System
  - 1.2.1 Directives
  - 1.2.2 Device Drivers
  - 1.2.3 Significant Events
  - 1.2.4 Mapped and Unmapped Systems
- 1.3 Tasks
- 1.4 RSX-20F Requirements
- 1.5 The Derivation of RSX-20F from RSX-11M
Chapter 2 Files-11 System
- 2.1 General Definitions
- 2.2 Files-11 File Specification
  - 2.2.1 Files-11 File Structure
- 2.3 Files-11 Directories
- 2.4 Fixed File IDs
- 2.5 FCS File Structure
Chapter 3 RSX-20F Glossary of Terms
Chapter 4 PARSER
- 4.1 Entering and Exiting the PARSER
- 4.2 PARSER Command Syntax
- 4.3 PARSER Console Modes
  - 4.3.1 PARSER Help Facility
- 4.4 PARSER Commands
- 4.5 PARSER Error Messages
Chapter 5 KLINIT
- 5.1 KLINIT Load and Start
- 5.2 KLINIT Operator Dialog
- 5.3 KLINIT Messages
  - 5.3.1 Informational Messages
  - 5.3.2 Warning Messages
  - 5.3.3 Dialog Error Messages
  - 5.3.4 System Error Messages
- 5.4 Reports Relating to the KLINIT Dialog
  - 5.4.1 External Memory Maps
  - 5.4.2 Internal Memory Maps
  - 5.4.3 Microcode Verification Error Reports
    - 5.4.3.1 CRAM Error Report
    - 5.4.3.2 DRAM Error Report
- 5.5 KLINIT Dialog Examples
Chapter 6 RSX-20F Utilities
- 6.1 COP Utility
  - 6.1.1 Function
  - 6.1.2 Format
  - 6.1.3 Examples
  - 6.1.4 Error Messages
- 6.2 INI Utility
  - 6.2.1 Function
  - 6.2.2 Format
  - 6.2.3 Examples
  - 6.2.4 Error Messages
- 6.3 MOU and DMO
  - 6.3.1 Function
  - 6.3.2 Format
  - 6.3.3 Examples
  - 6.3.4 Error Messages
- 6.4 PIP -- Peripheral Interchange Program
  - 6.4.1 Function
  - 6.4.2 Initiating PIP
  - 6.4.3 PIP Command String Format
  - 6.4.4 PIP Switches and Subswitches
  - 6.4.5 PIP Error Messages
- 6.5 RED
  - 6.5.1 Function
  - 6.5.2 Format
  - 6.5.3 Examples
  - 6.5.4 Error Messages
- 6.6 SAV
  - 6.6.1 Function
  - 6.6.2 Format
  - 6.6.3 Example
  - 6.6.4 Error Messages
- 6.7 UFD -- User File Directory
  - 6.7.1 Function
  - 6.7.2 Format
  - 6.7.3 Examples
  - 6.7.4 Error Messages
- 6.8 ZAP
  - 6.8.1 Function
  - 6.8.2 Invoking and Terminating ZAP
  - 6.8.3 ZAP Switches
  - 6.8.4 Addressing Locations in a Task Image
    - 6.8.4.1 ZAP Addressing Modes: Absolute and Task Image
    - 6.8.4.2 Addressing Locations in Task Image Mode
  - 6.8.5 The ZAP Command Line
    - 6.8.5.1 Open/Close Location Commands
    - 6.8.5.2 General Purpose Commands
    - 6.8.5.3 Using the Carriage Return
    - 6.8.5.4 ZAP Internal Registers
    - 6.8.5.5 ZAP Arithmetic Operators
    - 6.8.5.6 ZAP Command Line Element Separators
    - 6.8.5.7 The Current Location Symbol
    - 6.8.5.8 Formats for Specifying Locations in ZAP Command Lines
  - 6.8.6 Using ZAP Open/Close Commands
    - 6.8.6.1 Opening Locations in a Task Image File
    - 6.8.6.2 Changing the Contents of a Location
    - 6.8.6.3 Closing Task Image Locations
  - 6.8.7 Using Zap General Purpose Commands
    - 6.8.7.1 K Command: Compute Offset, Store in Quantity Register
    - 6.8.7.2 O Command: Display Branch, Jump Displacement from Current Location
    - 6.8.7.3 = Command: Display Value of Expression
  - 6.8.8 ZAP Error Messages
Chapter 7 RSX-20F Monitor
- 7.1 RSX-20F Executive
- 7.2 Tasks and Scheduling
- 7.3 System Traps
- 7.4 Terminal Service Routines
  - 7.4.1 Modem Handling
    - 7.4.1.1 Modem Handling Concepts
    - 7.4.1.2 Terminal Driver Routine
    - 7.4.1.3 Modem Timeout Routine
    - 7.4.1.4 The CTY and DL-11E Timeout Routine
  - 7.4.2 Terminal Handling
    - 7.4.2.1 Character Input Routine
    - 7.4.2.2 Terminal Timeout Routine
    - 7.4.2.3 Character Output Routine
Chapter 8 DTE20 Operation
- 8.1 DTE20 Communications Region
- 8.2 DTE Registers
  - 8.2.1 DTE20 Status Word
  - 8.2.2 Diagnostic Words
  - 8.2.3 DTE20 Data Transfer Registers
- 8.3 Using the DTE20 Registers
  - 8.3.1 Deposit and Examine
  - 8.3.2 Transfer Operations
  - 8.3.3 Doorbell Function
  - 8.3.4 Diagnostic Functions
- 8.4 Protocols
  - 8.4.1 Secondary Protocol
  - 8.4.2 Primary Protocol
- 8.5 Queued Protocol
- 8.6 DTE20 Driver Logic
  - 8.6.1 TO-10 Direct Packets
  - 8.6.2 TO-11 Direct Packets
  - 8.6.3 TO-10 Extended Direct Packets
  - 8.6.4 TO-10 Indirect Packets
  - 8.6.5 TO-11 Indirect Packets
  - 8.6.6 Register Conventions
  - 8.6.7 DTE20 Device Driver Functions
Chapter 9 Error Detection and Logging
- 9.1 The Keep-Alive Count
- 9.2 KLERR
- 9.3 Error Logging
  - 9.3.1 KL Error Logging
    - 9.3.1.1 FMPAR Example
    - 9.3.1.2 DEX Example
    - 9.3.1.3 HALT Example
  - 9.3.2 PDP-11 Error Logging
  - 9.3.3 TKTN Messages
- 9.4 LOGXFR
Chapter 10 Error Debugging
- 10.1 Using DDT11
- 10.2 Interpreting an RSX-20F Dump
  - 10.2.1 Useful Data in Dump Files
  - 10.2.2 Sample Dump Analysis
  - 10.2.3 Front End Status Block
Appendix A RSX-20F Stop Codes and I/O Error Codes
Appendix B File Transfers Between TOPS-10/TOPS-20 and RSX-20F
- B.1 Reformatting Files
  - B.1.1 Restrictions
  - B.1.2 RSXT10/RSXFMT Commands
- B.2 Transferring Files
  - B.2.1 Running FE
  - B.2.2 The FE: Device
  - B.2.3 RSX-20F Tasks
  - B.2.4 File Transfer Dialog
Appendix C Front-End Tasks
Appendix D KLINIK Access Dialog
- D.1 Significant KLINIK Events
- D.2 KLINIK Access Parameters
  - D.2.1 Usage of the Remote Terminal
  - D.2.2 Access Password for Remote CTYs
  - D.2.3 KLINIK Access Window
  - D.2.4 Console Mode of the Remote Terminal
- D.3 Operator Dialog with KLINIK
  - D.3.1 Setting Access Parameters
  - D.3.2 Examining the Current KLINIK Parameters
  - D.3.3 Terminating the KLINIK Link
- D.4 Remote User Dialog with KLINIK
  - D.4.1 Logging In as a Remote Operator
  - D.4.2 Logging In as a Timesharing User
- D.5 KLINIK Integrity over a Reboot
Appendix E Getting Help on RSX-20F
Appendix F EIA Pin Definitions

Company:	Digital Equipment Corporation
Part:	AA-BS94A-TK
Date:	1986-04
Keywords:	PDP-11/40

Address:	http://bitsavers.org/pdf/dec/pdp10/TOPS10_softwareNotebooks/vol14/AA-BS94A-TK_RSX-20F_System_Reference_Manual_Apr86.pdf
Site:	Al Kossow's Bitsavers
Format:	PDF
Size:	13147828 bytes (12.5 MiB)

Manx – a catalogue of online computer manuals

TOPS-10/TOPS-20 RSX-20F System Reference Manual

Copies

Table of Contents