DECHEBM—Hebrew/N-A Keyboard Mapping
This control function sets the keyboard mapping to Hebrew/N-A and resets the mapping to North American.
Format
CSI 9/11 |
? 3/15 |
3 3/3 |
5 3/5 |
h 6/8 |
Set |
CSI 9/11 |
? 3/15 |
3 3/3 |
5 3/5 |
l 6/12 |
Reset |
Description
When 8-bit characters are selected, DECHEBM switches between the Group 1 and the Group 2 character set mappings. It does not affect the keyboard character set selection or the processing of received characters.
When 7-bit characters are selected or the terminal is set to VT100 mode, setting DECHEBM does the following:
- Switches keyboard map to Group 2.
- Makes DEC 7-bit Hebrew the keyboard character set.
- Causes received characters in the range of 60 to 7A (hex) to be displayed using the DEC 7-bit Hebrew when ASCII is designated or invoked and keyboard Group 2 is active.
Resetting DECHEBM does the following:
- Switches keyboard map to Group 1.
- Makes ASCII the keyboard character set.
- Causes received characters to be displayed using the graphic left (GL) table of characters in use at the time.
Note
DECHEBM is only valid when a Hebrew keyboard language is selected. Also it does not convert ASCII or Hebrew characters already on the display.