DECserver 200 Hardware Installation/Owner's Guide

Company:	Digital Equipment Corporation
Part:	EK-D200C-IN-001
Date:	1986-10
Text:	d200cin1.txt

1 Introduction to the DECserver 200
- 1.1 DECserver 200 Models
- 1.2 Functions of the DECserver 200
  - 1.2.1 DECserver 200/MC (DSRVB-Ax)
  - 1.2.2 DECserver 200/DL (DSRVB-Bx)
- 1.3 Hardware Installation Overview
  - 1.3.1 Connecting the DECserver 200 to the Ethernet Network
  - 1.3.2 Connecting Port Devices to the DECserver 200/MC
  - 1.3.3 Connecting Port Devices to the DECserver 200/DL
- 1.4 DECserver 200 Software
2 Contents of Shipment
- 2.1 Number of Boxes
- 2.2 Contents of the DECserver 200 Box
- 2.3 Contents of the Accessories Box(es)
3 Site Preparation
- 3.1 Arranging for Software Installation
- 3.2 Placing the DECserver 200
  - 3.2.1 Offices
  - 3.2.2 Rack Mount
  - 3.2.3 Satellite Equipment Rooms (SER)
- 3.3 Cable Configuration Rules
- 3.4 Preinstallation Checks
4 DECserver 200 Installation
- 4.1 Introduction
- 4.2 Verifying the Voltage Select Switch Setting
- 4.3 Connecting the Transceiver Cable
- 4.4 Before Connecting Power
- 4.5 Connecting Power
- 4.6 Verifying Operation
- 4.7 Connecting Device Cables
  - 4.7.1 Connecting Device Cables to the DECserver 200/MC
  - 4.7.2 Connecting Device Cables to the DECserver 200/DL
- 4.8 Verifying System Installation
5 What To Do if You Have Problems
- 5.1 Introduction
- 5.2 Diagnosing Server Problems
- 5.3 D1 LED Off
- 5.4 D2 LED Off
- 5.5 D2 LED Blinking
  - 5.5.1 Error Messages 920 and 921
  - 5.5.2 Error Messages 922 and 923
  - 5.5.3 Error Messages 930 and 931
  - 5.5.4 Error Message 932
  - 5.5.5 Error Messages 941, 942, and 950
  - 5.5.6 No Messages on Console Terminal
- 5.6 D3 LED Blinking
  - 5.6.1 Down-Line Load Starts, Then Fails
  - 5.6.2 Down-Line Load Does Not Start
A Controls and Indicators
- A.1 Controls
  - A.1.1 Software Reset Switch (S1)
  - A.1.2 Voltage Select Switch
  - A.1.3 Circuit Breaker
- A.2 Status Indicator LEDs
B Port Devices Supported by DECserver 200
C Ordering Information
- C.1 DECserver 200 Hardware Units
- C.2 DECserver 200 Country Kits
- C.3 DECserver 200 Accessories
- C.4 DEC OFFICE Cable (BC16E) and Adapters
- C.5 Transceiver Cables
- C.6 Device Cables
D Cable Structure
- D.1 DECserver 200/MC Device Connectors (J1 through J8)
- D.2 Serial Line Circuit Standards
- D.3 Device Cables Used With DECserver 200/MC
  - D.3.1 BC22D Shielded Null Modem Cable (Data Leads Only)
  - D.3.2 BC22E or BC22F Shielded Straight-Through Cable (Full-Modem)
  - D.3.3 BC22R Shielded Null Modem Cable
  - D.3.4 BC17D Shielded Null Modem Cable
  - D.3.5 DECserver 200/MC Port Loopback Connector
- D.4 DECserver 200/DL Device Connector (J1)
- D.5 Device Cables and Adapters Used With DECserver 200/DL
  - D.5.1 BC16C 36-Conductor Cable (Data Leads Only)
  - D.5.2 H3101 36-pin Loopback Connector
  - D.5.3 H3102 36-pin Cable Coupler
  - D.5.4 H3106 36-pin to 50-pin Adapter
  - D.5.5 H3104 Cable Concentrator
  - D.5.6 H3103 MMJ Loopback Connector
  - D.5.7 BC16E-xx 6-Conductor DEC OFFICE Cable
  - D.5.8 H8572 6-Pin Cable Coupler
  - D.5.9 H8571-xx DEC423 to RS-232-C Passive Adapters
E DECserver 200 Specifications
- E.1 Power
- E.2 Environment
  - E.2.1 Temperature
  - E.2.2 Altitude
  - E.2.3 Relative Humidity
  - E.2.4 Physical Size of the DECserver 200
  - E.2.5 Space Requirements
F Service Options
- F.1 Hardware Services
  - F.1.1 Digital On-Site Service
  - F.1.2 DECmailer
- F.2 Installation Service
- F.3 Software Services
  - F.3.1 Software Produce Service Agreements
  - F.3.2 Training
G Connecting to Etherjack

Copies

Address:	http://vt100.net/mirror/antonio/d200cin1.pdf
Site:	Paul Williams' VT100.net
Format:	PDF
Size:	23947878 bytes (22.8 MiB)

Comments, queries or problems to <manx@celigne.co.uk>

DECserver 200 Hardware Installation/Owner's Guide

Table of Contents

Copies