DECSTR—Soft Terminal Reset
Perform a soft reset to the default values listed in Table 5–9.
Format
| CSI 9/11 |
! 2/1 |
p 7/0 |
Description
Table 5–9 lists the terminal's default settings:
| Mode | Mnemonic | State after DECSTR |
|---|---|---|
| Text cursor enable | DECTCEM | Cursor enabled. |
| Insert/replace | IRM | Replace mode. |
| Origin | DECOM | Absolute (cursor origin at upper-left of screen.) |
| Autowrap | DECAWM | No autowrap. |
| National replacement character set | DECNRCM | Multinational set. |
| Keyboard action | KAM | Unlocked. |
| Numeric keypad | DECNKM | Numeric characters. |
| Cursor keys | DECCKM | Normal (arrow keys). |
| Set top and bottom margins | DECSTBM | Top margin = 1; bottom margin = page length. |
| All character sets | G0, G1, G2, G3, GL, GR | Default settings. |
| Select graphic rendition | SGR | Normal rendition. |
| Select character attribute | DECSCA | Normal (erasable by DECSEL and DECSED). |
| Save cursor state | DECSC | Home position. |
| Assign user preference supplemental set | DECAUPSS | Set selected in Set-Up. |
| Select active status display | DECSASD | Main display. |
| Keyboard position mode | DECKPM | Character codes. |
| Cursor direction | DECRLM | Reset (Left-to-right), regardless of NVR setting. |
| PC Term mode | DECPCTERM | Always reset. |