||Ignored when received (not stored in input buffer) and used as a fill character.
|End of text
||Can be selected as a half-duplex turnaround character.
|End of transmission
||Can be selected as a disconnect character or half-duplex turnaround
character. When used as a turnaround character, the disconnect character is DLE-EOT.
||Transmits answerback message.
||Generates bell tone.
||Moves cursor to the left one character position; if cursor is at left margin,
no action occurs.
||Moves cursor to next tab stop, or to right margin if there are no more tab stops.
||Causes a linefeed or a new line operation. (See Linefeed/New Line). Also causes
printing if auto print operation is selected.
||Processed as LF.
||Processed as LF. FF can also be selected as a half-duplex turnaround character.
||Moves cursor to left margin on current line. CR can also be selected as a half-duplex
||Selects G1 character set designated by a select character set sequence.
||Selects G0 character set designated by a select character set sequence.
|Device control 1
||Processed as XON. DC1 causes terminal to continue transmitting characters.
|Device control 3
||Processed as XOFF. DC3 causes terminal to stop transmitting all characters except
XOFF and XON. DC3 can also be selected as a half-duplex turnaround character.
||If received during an escape or control sequence, cancels the sequence and displays
substitution character ().
||Processed as CAN.
||Processed as a sequence introducer.